Mittens with ornaments. Knitting mittens with a jacquard pattern. Knitted mittens for children video

A good way to become the owner of unique mittens is to knit them yourself. It is more convenient to crochet a small-format circular item, but there are many ways to get by with knitting needles - five or two. Beginners should study different techniques in theory and choose the one that is easiest to understand and implement in practice. Simple mittens are easy to knit, but they are unlikely to become original unless they are additionally decorated with embroidery or appliqué, including 3D ones. Even if you are unsure of your knitting skills, you can achieve an interesting result if you apply maximum imagination to your mittens.

Where to start knitting mittens

To knit a product, you must first have a good idea of it. Not abstract mittens, but the kind you would like to wear or give to a relative or friend. You need to decide on the color of the mittens, their thickness (for severe frosts, for light winters, for the demi-season period), and their purpose (for sports, going out, for everyday wear). Women's and men's mittens can be decorated with a pattern, but in the first version it can be delicate or elaborate, and in the second it can be more strict and laconic.

Children's mittens should be made from safe materials, but at the same time very durable. Little naughty kids put their mittens under constant stress: they either build a snowman, or slide down a hill, sliding on the ice or running their palms along the wooden side. And as the children grow up, skiing and skating, building snow forts, etc. will become their usual hobbies. This is an even greater burden on the mittens. That is why it is recommended not only to tie them, but also to provide the inner side, which falls on the palm, with waterproof and low-abrasion material.

Yarn selection

Very thick threads, as well as knitting needles, are not suitable for small accessories. The finer the texture, the more interesting the designs can be on the mittens. It is most convenient to knit with knitting needles 3 mm or thinner. The yarn should not exceed the thickness of the diameter of the knitting needles.

For cold weather, it is good to knit down mittens, but it is better to add synthetic thread to pure down yarn for strength. You can also use mohair with the addition of synthetics. Colored acrylic yarn is great for demi-season mittens. It is good for making mittens - mittens without fingers. This accessory is indispensable for those who have to spend a lot of time driving.

Selection of scheme and pattern

Here everything completely depends on your imagination. Some people prefer jacquard patterns, traditional for factory-made mittens. Some people prefer to knit plain mittens with knitting needles and then decorate them with crocheted details. Some people prefer embroidery on the finished product. But even for such a small thing, you can choose a textured ornament, made immediately with knitting needles. Experienced craftswomen can make “bumps” and “aranas” on mittens. Openwork patterns only make sense for mittens or double-layer mittens.

Beginner knitters should choose the simplest pattern or stocking stitch in order to master the techniques of creating mittens with knitting needles. You can decorate the mittens later - with embroidery, beads, beads, sequins. If you want to do everything at once, then you should choose thread with lurex for the mittens.

Knitting mittens - instructions for beginners

In simple terms, the mitten consists of two “chambers”: the smaller one for the thumb, the larger one for the palm. People who are inexperienced in knitting should study in detail how to knit the transition from one “chamber” to another so that the mitten turns out to be solid. When performed on two knitting needles, you get one beginning - an elastic band - and two ends: one on the finger, the second on the main part. We will return to the elastic band later, but now we will look at how the main part of the mitten is knitted with five knitting needles. To make a beautiful transition from the elastic to this part, you can add one loop in the middle of each of the four knitting needles. To prevent a hole from forming, an additional loop should be made not by yarn over, but by knitting it from the broach between the loops. Next, the mitten is knitted in the round to the point where you need to move to the thumb.

Here you should knit a thread of a different color without fastening it, since you will have to take it out later. From the first knitting needle we knit one loop with the main thread, then replace it with a thread of an alternative shade, and knit all the loops from the knitting needle to the last one. Then remove loops of a different color one by one from the working needle and string them onto the 1st needle. We knit these loops again with the main thread, then we knit the last loop that remained on the first knitting needle, and continue knitting on the remaining three knitting needles. The base for the thumb is ready.

We continue knitting mittens with knitting needles until the end of the little finger. For some people, the little finger is much shorter than the other fingers. Then you can knit a few more rows - up to the nail holes on the ring or index finger (depending on which one is located lower on the raised palm). From this point you can move on to gradually closing the loops - forming the toe.

Decrements are made at the beginning of needles 1 and 3, as well as at the end of needles 2 and 4. On knitting needles 1 and 3, the first loop is removed from the front wall, the second loop is knitted and pulled through the first. On needles 2 and 4, the penultimate stitch is knitted and returned to the non-working needle. Using a working knitting needle, we pull this loop into the last loop that remains unknitted. So we close until the moment when there are a couple of loops left on the knitting needles. They can be pulled through each other one after the other, and the cut thread can be pulled into the last loop and tightened. Hide the thread in the knitting.

How to tie a thumb

It's time to return to the colored thread - the thread for the thumb. It needs to be carefully pulled out, and the loops on both sides caught on two knitting needles. You need to pick up a pair of loops from the side walls of the hole using the remaining two knitting needles. Distribute the stitches on four needles evenly and knit the thumb in a circle. You can close it with the same “wedge” as the main part of the mitten.

How to knit an elastic band

It’s easy to knit a beautiful elastic band for a mitten. You need to cast on two knitting needles the required number of loops, a multiple of four. Next, the loops are distributed equally onto four needles. The knitting needle where the tail of the thread ended up is called the first; The rows are counted from it. We begin to knit a 1 x 1 elastic band. As soon as we reach the second row, we knit as the loops “look”. We knit the front loops on the front wall, and the purl loops on the back wall. Then we will get the same beautiful elastic band as when knitting in rotary rows. In order for the elastic to fit well around the wrist, it must have a sufficient height - 4-5 cm.

Mittens with 2 knitting needles

Using two knitting needles you can knit a mitten with a seam. It is knitted in the form of a sweep, and then its parts are connected. Knitting begins with taking measurements. Next, cast on the required number of loops for the elastic, a multiple of 2, plus two edge loops. The elastic is knitted according to the 1 x 1 pattern of the desired height (4–5 cm). Let's move on to the main part of the mitten. If it is necessary to make an extension, then add loops evenly, knitting them with a knitting needle from the broach between the two loops of the previous row.

When we reach the beginning of the thumb, we knit a couple of loops, then remove the number of loops required for the finger onto additional knitting needles (a pair of flexible knitting needles) of the same diameter. You can calculate the number of loops as half the circumference of your thumb plus a small margin to make it easier to put on and take off the mitten. Next, we knit only these loops with additional knitting needles until the end of the thumb. We check the size and continue knitting so that the resulting strip freely goes around the thumb in length.

Now we return to the main knitting needles and put the loops from the end of the strip onto the working knitting needle. We knit to the end of the row, turn the knitting and continue to knit all the loops, including the “finger” ones and those that remained knitted before the finger was formed. We reach the end of the mitten and divide the loops in half. Again we will use additional knitting needles, where we will remove half the loops. We knit the remaining part with decreases on both sides. When a third of the total number of loops remains on the knitting needles, you can simply close them off. We take additional knitting needles and knit the same thing on them. We sew the side parts of the thumb on the wrong side, and then the entire mitten. We use a knitted seam.

How to finish a mitten

Knitted mittens often end with a wedge, but not everyone likes this pointed edge. You can round the mittens a little, giving them a more feminine silhouette. The faster the loops decrease, the more obtuse the angle is at the end of the mitten. If we work with five knitting needles, then on each of the four “well” knitting needles we need to make two decreases - in the middle and at the end, knitting two stitches together. So you need to reduce the number of loops row by row until there are 4 or 8 loops left. They can be combined by knitting into each other or tied with thread. The toe will be flat and neat.

Knitting mitts with knitting needles - diagrams with descriptions

It’s even easier to knit mittens with knitting needles: you won’t need any decreases at the end of the mittens or the wisdom of doing the thumb. Sometimes the mitts contain a wedge into which the thumb comes out, sometimes there is just a hole. The most closed version of the accessory has a thumb tube topped with an elastic band. A similar elastic band is made along the edge of the wide part of the product. The simplest version of openwork mittens can be tied with a finger hole.

The peculiarity of openwork mittens is that they are well ventilated, it will not be too hot in them, and besides, such an accessory is perfect for a cardigan knitted with a similar pattern. The ornament should be placed on the outer side of the palm, the inner side can be knitted with a smooth fabric from facial loops or also made into an openwork pattern. First, you should knit the sample with the same knitting needles that you take for work, measure it and calculate how many loops you need to cast on in a circle for the palm part. To do this, the circumference of the palm is first measured.

You need to start knitting with an elastic band. Its size depends on the circumference of the wrist. You can also knit a separate elastic band and measure how many loops fit around your wrist. When knitting with five knitting needles, do not forget that you need to make sure that instead of elastic, you don’t get “millet”. If we see a front loop, then we must also knit a similar one above it.

Having knitted 4–5 cm with an elastic band, we move on to the main ornament of the open mitten. If an extension is needed on this part, then add a loop, knitting it from the jumper between the loops of the previous row. If you need to decrease the loops, then simply knit two loops at an equal distance from each other. While the openwork pattern is worked in the round, odd rows are knitted according to the pattern, even rows are knitted. But as soon as we approach the thumb hole, we have to switch to turning rows, although knitting continues with five knitting needles. And then even rows need to be knitted exclusively with purl stitches. As soon as the edges of the hole need to be closed, you will have to switch back to circular knitting, therefore, even rows need to be made with facial loops. You can finish knitting with an elastic band 1–2 cm long, and then close the loops.

Making thick mittens with a pattern is somewhat easier than knitting mittens. The difficulty may be the wedge for the thumb. If we have an ornament on the outer part of the mitts, then along the inner side and the wedge we should make a smooth fabric in stocking stitch. The beginning of the wedge is located not far from the elastic - after a couple of rows. The basis for the wedge is the second loop on the first needle. To make it symmetrical, you need to yarn over on both sides of this loop or knit a new loop from the jumper. The second option is preferable, because this way you won’t get holes in the knitting. Increases must be made through the row. Then try on the product to see if it has reached the base of the thumb. We knit a couple more rows and remove the wedge loops onto an additional knitting needle or pin. We close the remaining loops in a circle and knit to the base of the remaining fingers. Close the loops and transfer the knitting needles to the wedge. From the side loops of the hole we cast on half as many loops as we have left on the pin. Next, knit a small elastic band in the round with knitting needles and bind off the loops.

For the little ones, it’s also easy to knit mittens. The product turns out to be so miniature that the minimum amount of time will be spent on it. But you can give free rein to your imagination by designing the mittens to look like cartoon or fairy-tale characters. You can also come up with a lot of different decorations. There is no difficulty in knitting small things; you just need to take a tool with a smaller diameter if you want to make a pattern on the mittens.

What patterns should I choose to knit mittens for a girl? Delicate, floral, airy. The main thing is not to forget that mittens are needed for warmth, and that the child should be comfortable in them. There are several options for how to decorate mittens made with knitting needles. It's easy to knit mittens with an owl. The night bird will have to make eyes from two small beads. For infants, it is worth making mittens with knitting needles without knitting the thumb separately. It’s better for kids when the whole hand is in one “container”, because it’s warmer for all the fingers. It’s good to make such mittens with ears and embroider a kitten’s face. This item of children's clothing is often called “scratch mittens,” but not because it can scratch, but because a child wearing such mittens cannot accidentally scratch his face.

Older children can knit mittens with knitting needles equipped with a thumb. To the delight of the baby, it is worth making an image of cat pads on the inside of the mittens. They can be knitted directly with knitting needles or crocheted separately and sewn on as an applique.

Knitted mittens - with hares, foxes, bears and bullfinches - are equally good for boys and girls. Only the color scheme will differ.

For a child, you can knit mittens using knitting needles using the same pattern as for an adult. We have already learned how to make an elastic band and the transition to the thumb. All that remains is to figure out how to make an interesting pattern using only knitting needles. First, let's audit the remaining yarn and evaluate what shades are available. Let's select an interesting picture in the desired color scheme. For example, leftover blue, red, black and brown yarn will allow you to make a bullfinch on a branch. If there are several shades of green and brown, you can make mittens with a tree.

It’s good if you have a picture that is pre-divided into squares for knitting. But if this is a cross stitch pattern, then it will have to be slightly transformed. Knitted fabric stretches in width. The drawing will also stretch out. Therefore, you need to knit a test sample of garter stitch 10 x 10 stitches with the selected yarn and knitting needles that you intend to use. Next, we measure how many centimeters in length and width we have in our sample, make up the proportion and re-divide the drawing into squares with the correction.

Knitting "Cat" pattern

You need to start knitting mittens with knitting needles from the main tone, making an elastic band for them. Next, we move on to garter stitch and introduce threads of other colors. It is advisable not to tear them off each time and tie them with a thread of the main or another color, but to lay them down while working. To prevent the threads from interfering in the future, they should be hidden in the knitting or sewn from the inside out into interlining in place of the design. This way, the child’s fingers will not get tangled in the stretched strings.

Mittens knitted - beautiful knitting

The textured knitting on the mittens is no less interesting. If you have learned how to use knitting needles and a knitted pin well, then it will be easy for you to make “braids”, “ropes”, “tulips” and other ornaments with overlapping loops - “aranas”. It’s better to watch a video on how to do this rather than explain it in text format.

An interesting idea is to knit mittens for lovers. At the stage of a romantic relationship, it is so nice to walk down the street holding the hand of your loved one. But when both hands are in mittens, it is difficult to feel each other's warmth. Therefore, the set for lovers contains only three mittens: two regular and one double, with two cuffs and a common chamber for two hands. It resembles a curved muff. If you start knitting it from elastic bands, you will have to use two sets of knitting needles, knit an elastic band on each of them and another couple of centimeters with the main pattern.

Then you will have to redistribute the loops and knit a common “well” with only five knitting needles to the desired height. Make decreases at the top in exactly the same way as for an ordinary mitten. When knitting a double mitten with knitting needles, you do not need to make a separate cover for your thumbs. Let them all be inside, because it’s more convenient to hold hands.

Have you been able to master knitting mittens? Get started on the men's mitts. A husband or father will need them when driving a car. And when repairing a car in cool weather, this is generally an irreplaceable thing. These mittens give complete freedom of movement, do not affect the sensitivity of the fingers, but still provide warmth.

It is also worth arming yourself with knitting needles and knitting separate caps on your fingers for such mittens. The caps must overlap the length of the mitts so that they can be fastened. On the outside they can be secured with a button, but on the inside of the palm such a fastener will become a hindrance. It's better to use Velcro here because it's flat.

Another reason to knit transformable mittens is the constant need to use a touch phone or tablet. Gadgets are sensitive to the heat of hands, and sometimes you have to expand or contract the image, but this cannot be done with a mitten.

Knitting men's mitts is easy: you don't need any complex patterns, you can get by with a modest garter stitch.

Beautiful mittens are never superfluous, don’t you agree? And although this phrase is common, it is true: each of us wants it to be not only warm, but also cute. So we choose the most beautiful patterns for mittens, for example...

Knitted mittens - do you need them? Needed! What if you knit mittens in a new way? Not from an elastic band, as our grandmothers did, but from fingers? If you are ready to experiment, then you will appreciate this great idea. How to tie in...

This amazing invention is mittens: as soon as you need them, they disappear somewhere... Not even an invention, but a creation! It seems that at the most crucial moment they have arms and legs, and they are able to move quickly, quickly...

Is it possible for a child to do without warm mittens in winter? No, no and NO! These mittens are easy to knit with knitting needles yourself if you know some of the nuances of making such products. Our selection of lessons will help you understand...

Knitting crosswise is a great way to change the way you look at ordinary things. This technique will make your products especially original and attractive. You can knit anything crosswise! Today we will tell you how...

If you are seriously interested in knitting, then you are probably interested in various techniques of this needlework. For example, how to knit a finger from mittens? There are several methods that differ from each other and...

It's time to start preparing New Year's gifts, if you haven't already. There is just time to make something beautiful with your own hands before the New Year, for example, mittens. And not simple ones, but with New Year's or Christmas...

Well, yes, the weather is not yet conducive to wearing knitted mittens - it seems cool in the mornings, but not to that extent, and in the afternoon it’s generally gentle and velvety, but it won’t always be like that! Now it seems and I want it to...

Knit mittens with knitting needles to keep your hands warm even in the most severe frost!

Mittens are the most practical and convenient accessory for cold winters. Today you can buy mittens of different models on the market, but it is more pleasant to wear if you knit them yourself.

If you learn how to knit clothes, then you can create entire sets for winter - a hat, scarf or snood and mittens. These things complement each other perfectly if they are created in the same style using the same pattern.
To learn how to knit beautiful mittens, you must first create a simple model of mittens - with a simple pattern and without a seam.
Based on the skill of knitting such accessories, you can knit any warm items of clothing for your husband and children.

Every woman should know how to knit mittens, just like woolen socks. Let's look at how to create simple mittens for women and men using knitting needles without a seam.

Diagram and description:

Such a product can be plain, or you can add a thread of a different color to the elastic or stockinette stitch. The knitting pattern for such mittens is simple: 2x2 elastic on the wrist, the rest is stockinette stitch.

For the knitting process, prepare wool yarn- 70 grams and 5 short needles No. 3.
For a wrist girth of approximately 20 cm, you need to cast on 36 loops(9 loops on each knitting needle).
Knit the right mitten first. Mentally, number the knitting needles for yourself: on the 1st and 2nd knitting needles there are loops of the lower part of the product (palm), on the 3rd and 4th knitting needles - the upper ones.
First tie a 2x2 elastic band 7 cm high.
Then knit in the round facial loops to the beginning of the thumb - 7 cm.

We continue the steps:

Knit the thumb on the right part on the first needle, and for the left - on the second knitting needle. So, knit the first loop of the first knitting needle with regular stockinette stitch, and remove the remaining 8 stitches with a safety pin and fasten it.
Then cast on 8 yarn over stitches on the same needle. and knit the last 9th stitch in stockinette stitch. The mitten had a hole for the thumb.
Now knit to the nail of the little finger - 8 cm.
Toe mittens knitted with decreasing stitches. On the 1st and 3rd needles, knit the first two loops together behind the back wall. Pre-turn the first loop. On other knitting needles, knit two loops together at the end behind the front wall.
Knit like this until there are 2 loops left on each knitting needle.. Tighten the loops and fasten from the inside out.
Thumb knitting- remove the pin and insert one knitting needle in place of this pin, and thread the second one on the opposite side. It turned out 7 loops on the bottom knitting needle and 6 loops on the top.
Distribute stitches onto 4 needles: three will have 4 loops, and one will have 3 plus one loop pulled out from the side edge.
Knit your finger in a circle to the beginning of the nail. Then start decreasing.
Decrease on the toe is done as on the toe. When there is one loop left on each knitting needle, pull the loops and fasten from the wrong side.
Knit the left mitten similarly to the right one, but in a mirror image.

If you have mastered the technique of knitting with stockinette stitch, then you should start knitting openwork patterns. Mittens using this pattern look original and stylish.

Knit such openwork mittens with knitting needles, it will turn out interesting, and your hands in such an accessory will be feminine and beautiful.

Pattern diagrams with descriptions:

Cast on 44 stitches - 11 stitches on each needle. Tie a 2x2 elastic band.
Knit the first row with knit stitches.
On the next row, decrease 2 stitches together. Do this on each knitting needle.
Two knitting needles - stockinette stitch. Start knitting the other two knitting needles: purl, the rest knit, the last one - purl.
Again, knit stitches on two needles.
One purl and 6 knits, yarn over, knit, yarn over, slip one loop, remove 2 loops to the left side. Pass the next loop through the loop you removed and pull through it. Next, knit to the end of the needle.
Two knitting needles again in stockinette stitch.
Purl loop, 7 knit stitches, yarn over, knit stitch, yarn over, knit stitch, place the loop on the right needle and knit two stitches down. Pull the loop that was crossed over through the next loop. Then knit to the end of the needle.
Again 2 knitting needles.
Purlwise, place 3 stitches on a free needle and leave to work. Knit three, then transfer stitches from the auxiliary needle and knit in stockinette stitch. Knit two stitches, yarn over, knit stitch, yarn over, knit 2, slip 1 stitch onto a working needle, decrease two stitches. Pull out the thrown loop, knit 2, purl.
Two knitting needles in stockinette stitch.
Wrong side, 9 knit stitches, yarn over, knit stitch, yarn over. 3 knits, 3 knits. Cross the loop and 2 together. Pull the loop through, wrong side out. Rapport is ready. Continue this way until the toe of the mitten.

Watch the video for details on knitting this pattern. The craftswoman made double mittens with a knitted lining.

Video: Knitting Double mittens - Openwork leaves with braids. Part 1

Video: Knitting Double mittens - Openwork leaves with braids. Part 2

Video: Knitting Double mittens - Openwork leaves with braids. Part 3

Video: Knitting Double mittens - Openwork leaves with braids. Part 4

Video: Knitting Double mittens - Openwork leaves with braids. Part 5

Video: Knitting Double mittens - Openwork leaves with braids. Part 6

Video: Knitting Double mittens - Openwork leaves with braids. End.

Here are a few more openwork patterns for knitting mittens:

You can knit mittens and a shawl with this pattern to create an interesting set.

An original pattern that is easy to knit. Leaves and cones will perfectly decorate your mittens.

Beautiful diamonds stacked on top of each other will look great on the top of the mitten.

Mittens for lovers are a stylish accessory that symbolizes the warmth of feelings and unity. In these mittens, it’s nice to feel the warmth of your loved one while walking together in severe frost.

Knit mittens for lovers with knitting needles with a white heart on a red background, or vice versa, with a red heart on a white background. In addition, you can make a common mitten so that when walking along the city streets, you can always hold hands and bask in each other’s warmth.

Diagram describing a common mitten:

The photo shows that the elastic band of the mitten for each hand is knitted separately. Knit 7 cm with a 2x2 pattern - 2 pieces. Cast on 16 stitches on each needle. We will knit with two knitting needles.
Now connect two elastic bands on circular knitting needles.

Let's continue:

Knit in stockinette stitch in the round. There is no need for a hole for fingers on such mittens. Therefore, knit 7-8 cm before starting to create the heart.
Knit the heart according to the pattern, first making 6 loops in the middle of the knitting on one side, with white thread, through 2 loops.
In the next row there will already be 7 loops with a white thread through one red thread. Next, continue according to the pattern, first knitting the loops with white thread, then decreasing the white color until one loop remains.
Tie the toe of the mitten as described above and when 2 loops remain, tighten them and secure them on the wrong side.

Here are a few more photos of how you can knit mittens for lovers:

The pearl pattern is often used for knitting. Even a novice needlewoman can knit mittens with this pattern, as it is simple.

How to knit women's mittens with knitting needles with a pearl pattern? Scheme:

Description:

1st row alternates 1 knit stitch, 1 knit stitch.
2nd row - again alternate 1 purl and 1 knit, but knit a purl over the knit stitch of the previous row, and a knit stitch over the purl.
Then repeat the 1st and 2nd row until the end of knitting.

Double mittens are convenient to wear in cold weather or when you want to play in the snow, especially for children. These mittens will not get wet quickly, and your hands will always be warm.

How to knit winter women's and men's double mittens with knitting needles? Some tips:

If knitting is still difficult for you, then knit the inner and outer mittens separately.
First knit the inner mitten. Then create the rib of the outer mitten and stockinette stitch to the base of the thumb. Pull the outer mitten over the inner one, straighten your finger so that it is on the outside and start tying it - it will be more convenient.
To prevent the lower part of the mitten from slipping out, make a couple of stitches in several places of knitting and secure the parts.
To knit the lower part of the mittens, use thin yarn, and for the upper part, use thick woolen thread. As a result, the mittens will turn out warm and beautiful.

Tip: You can link two mittens separately and then insert one into the other, connecting the bottom of the elastic using a regular needle and thread or crocheting the edges. You can also knit in one piece, and then insert one part into the other. A simple fold is formed exactly in the center of the knitted elastic band.

A classic of the genre - jacquard mittens for winter in Russia. The knitting is double and dense, thanks to the interlacing of threads of different colors. The product will be warm, and your hands in such mittens will never freeze.

How to knit jacquard women's mittens? Scheme:

Beautiful and very stylish pattern. The diagram shows all the colors of the threads used.

These mittens are knitted from only two colors of yarn, but they look so interesting.

Jacquard pattern "Owl" - stylish and fashionable.

Jacquard pattern with deer. Only a true needlewoman can knit mittens with such an ornament.

Mittens with arans look luxurious. Products with this pattern are knitted for both adults and children. They turn out warm and beautiful.

How to knit women's long mittens with diamonds and arans using knitting needles? Scheme:

Important: Manizkas, snoods and hats turn out beautifully with this pattern. Therefore, you can knit a whole set - elegant and stylish.

You can knit warm down mittens from mohair. You can use any pattern. “Braids”, “Aranas” and others are suitable. Here are approximate patterns for knitting mohair mittens:

You just want to put on mittens with snowflakes and go for a walk in the cold, brushing snow off the branches of trees and bushes. Knitting such mittens is simple: cast on 44 loops, distribute on 4 knitting needles, knit a 2x2 (7 cm) elastic band and 7 cm in stockinette stitch. Next, leave a hole for the finger, as described above, and begin knitting the snowflake itself.

Below is a diagram and description of how to knit women's New Year's mittens with a snowflake. This pattern is also called “Norwegian”:

The elegance of the hand, the uniqueness of the image, the delicate style - all this is emphasized by the “Princess” mittens. An interesting pattern reminiscent of arans will make the products original and beautiful.

So, let's learn how to knit “Princess” mittens. Diagram and description:

Mittens of the “Princess” model can be knitted with different patterns. For example, the drawing “Owls”.

The pattern with plaits looks beautiful on the mittens. Here is his knitting pattern:

A deer, like a snowflake, is a symbol of winter and the New Year. Therefore, for knitting sweaters, socks and mittens, a pattern depicting this animal is used.

How to knit men's and women's mittens with deer with knitting needles? Schemes, description:

Here is another pattern for knitting a deer on mittens.

Tip: You can come up with your own deer, draw a diagram yourself and knit mittens using it. The result is a unique and original accessory.

The strands on knitted items are intertwined in a chic and unusual way. Mittens with such a pattern will definitely attract attention. This accessory will add individuality and originality to your look.

Mittens with strands are easy to knit with knitting needles. Below is a diagram according to which you can create the outer part of the mitten on two knitting needles. On the other two knitting needles, the inner part of the product is knitted in stockinette stitch.

It is better to see clearly how to knit such patterns. The video explains in detail how to create an interesting accessory - mittens with cords.

Video: Knitting mittens with strands Part 2 Basic pattern.

Transformable mittens are convenient because when necessary, you can open your fingers without removing the product itself from your hand. These gloves make it convenient to use a mobile phone in the cold. It is also comfortable to work, for example, for trade workers if their activities take place on the street. When you need to accept and count money for a purchase, just remove the valve from the mitten and your fingers will be free.

Tip: Transformable mittens for men and women without fingers with a folding top are easy to knit. For a woman, you can take yarn in delicate shades: beige, white, pink, and for a man - blue, black, brown.

Diagram and description:

Knit these mittens using regular stockinette stitch. Elastic according to the pattern 1x1 or 2x2. Below is a knitting pattern for transformable mittens.

Description of work:

The Braided pattern looks unusual. If you knit mittens using “Braid”, you will get a stylish accessory. This pattern is easy to knit - repeat repeating from the 9th row.

How to knit braided mittens with knitting needles? Scheme:

Description of knitting for this pattern:

Stages of work:

First, knit 7 cm of elastic, casting on 36 loops and distributing them onto 4 knitting needles.
Then knit using regular stockinette stitch on two needles, and the Braided pattern on the other two needles.
Leave a hole for the toe and knit until the beginning of the toe.
Now start decreasing stitches by 2 on each needle: on the first two knitting needles first, and on the other two at the end of knitting.
When there is 1 loop left on each knitting needle, pull them off and fasten them from the inside out.

Norwegian patterns are winter, trees, deer and snowflakes. Even if you knit only a snowflake, it will already be considered a pattern in the Norwegian or Scandinavian style. On the mittens you can create deer, nature or snowflakes separately, or combine them in one pattern. There are no limits to imagination!

How to knit mittens “Norwegian patterns”? Diagram with description:

Important: When knitting such an ornament, it is important to be able to pull the thread, because you need to constantly change yarn from one color to another. Monitor the quality of the drawing so that the thread tension is uniform and the pattern does not lose its shape.

The pulling process is performed as follows: straighten the knitted loops on the right knitting needle, pull the thread along them, and hold the thread with the index finger of your right hand, pressing it against the last knitted loop. On the wrong side, it is more convenient to press the thread with the thumb of your right hand.

Tip: On the right side, knit with knit stitches and pull the thread of the unused color so that it remains under the right needle. On the wrong side, knit with purl stitches and with your left hand, pull the other thread in front of the work and under the right needle. On the wrong side, the threads are pulled in front of the loops.

If you have learned how to thread a thread of a different color, then you can start knitting Norwegian patterns using any of the patterns. One cell in the diagram is one loop of a certain color.

Video: Knitting (mittens with “Norwegian pattern”)

This type of knitting can be done without broaches, but the fabric will be thinner than with broaches. Watch the video on how to knit jacquard without broaches.

Video: The simplest way to knit jacquard without broaches

How to knit mittens “Braid with shadow”: description

Look how original these mittens look. Unusual, and few women knit this way. Make these mittens with your own hands and surprise your friends and family.

Pattern for knitting an Indian wedge for mittens:

Knit the back side of the mitten as usual - with any pattern or just with knit stitches. On the palm: 1st row- Knit 15, from the 16th loop knit 2 on the front and back walls, knit 4.
2nd row- Knit 15, from the 16th loop knit 2 on the front and back walls, knit 5.
Knit further 15 rows according to this pattern with adding loops to the palm in each row. As a result, there should be 15+20 loops on the first two needles.
In the 16th row remove the finger loops onto the thread, close the knitting in a circle and continue knitting until the required length of the mitten.

You have already knitted mittens in different patterns, but you want something unusual and original. Knit mittens from thick yarn. It will turn out very interesting, and the products will be warm and comfortable.

How to knit warm women's and men's mittens from thick yarn? To knit mittens from this yarn, cast on half as many stitches as to knit mittens from thin threads. But in order not to make a mistake with the number of loops, you need to make some calculations:

Knit with a pattern of 10 cm thick yarn and calculate how many loops you have in 1 cm of knitting.
Now you know how many stitches to cast on for one mitten - 18-20 or a little more.

Important: Knit mittens from thick yarn in simple patterns - knit or purl stitch, tangle stitch, and so on.

If you know how to not only knit, but also embroider, then you can create beautiful mittens. Knit mittens in one color and make beautiful embroidery on the back.

Photo of mittens knitted with embroidery:

Knitted mittens with delicate embroidery: photo

Set - hat, snood and mittens knitted: photo of models

Knit a set for yourself, your child or your husband - a hat, snood and mittens. It will decorate any image, and things made by the hands of a loved one will warm you in severe frosts.

Set - hat, snood and mittens knitted - photo of models:

Beautiful products associated with the use of Arana and Braid patterns.

Set - hat, snood and mittens knitted in pink: photo of models

A dark set created using the Braid with Shadow pattern. It will look great with a coat or jacket in a contrasting color.

Set - hat, snood and mittens knitted with an interesting pattern: photos of models

And again the green tint is the color of the Christmas tree. Aranas and braids decorate the hat, mittens and snood.

Green set - hat, snood and mittens knitted: photo of models

A gray set, but not at all boring, and even very stylish and interesting.

Gray set - hat, snood and mittens knitted: photo of models

And again the “Braids” pattern, but the set is already crocheted in beige. Classics always decorate and add originality to the image.

Set in beige color - hat, snood and mittens knitted: photo of models

Knit things with your own hands. Make your family and friends happy. If you knit a set, it can be an excellent gift, for example, for the New Year.

Video: KNOWN MITTENS. CHILDREN'S MITTENS FOR 2 YEARS OF AGE. HOW TO KNIT MITTENS OF ANY SIZE?

Mittens are a very warm, cozy and stylish accessory. Any needlewoman, even a beginner, can afford knitted mittens. They are very easy to use and the results will not be long in coming. In order to get a pair of warm and stylish mittens you will need to spend one or a couple of evenings.

In the article below we will look at knitting mittens with a pattern, patterns, descriptions and photos of various models. The design on the mittens can be knitted according to a pattern, embroidered, jacquard or sewn on. Elements of the design can be knitted or felted from wool for felting. There are many options, let's deal with them all in order. But first, a little about what yarn is suitable for knitting mittens.

For knitted mittens and gloves, you should choose a thread that is not very thick. It is good to use a thread 200-250 meters long in a 100 gram skein. You shouldn’t take a thicker thread, otherwise it will be difficult to knit the finger. If the yarn is thinner than indicated above, then you can knit in 2 threads.

For mittens with a pattern, you need to use regular blended yarn. This is a wool blend with various composition options. A thread that contains half wool and acrylic is suitable. For fluffy mittens, you can use alpaca or add a thin thread of mohair or kid mohair to the main thread.

As for the knitting needles, mittens are usually knitted on 4 knitting needles. To do this, use a set of 5 double-sided double-sided needles. The number of knitting needles can be taken according to the recommendations on the yarn or the characteristics of knitting. Numbers 2.5 or 3 will be universal for mittens.

The principle of knitting mittens

Mittens can be knitted in different ways; let’s look at the most common method using 4 knitting needles. Any mittens can be knitted according to this description, both simple, smooth ones and mittens with a pattern, simply based on the diagram of the selected pattern.

First you need to calculate the number of loops. This is easy to do, you need to knit a sample, measure the circumference of your palm and calculate the required number of loops. On average, for a palm girth of 20 centimeters you need to cast on 40 loops. The description is designed for this number of loops, but it can be easily adjusted to suit your number.

Let's prepare the yarn and knitting needles and get started:

We cast on 40 loops and, knitting the first row with an elastic band 1 by 1, distribute 10 loops on each knitting needle.
We knit an elastic band 1 by 1 in a circle for several rows. We make the elastic band 5-7 centimeters or as planned.
Next, we begin to knit with facial loops. Some people advise making additions here, but they are not necessary, especially if the palm is not wide, since the elastic narrows the fabric, and the front rows make the fabric wider with the same number of loops. We knit several rows (10-12) with facial loops until the thumb is formed. During the knitting process, it is better to try on the mitten on yourself.
To form the thumb, knit 1 stitch on the first needle and put the next 7 stitches on a thread or pin. We cast on new 7 loops on the knitting needle and continue knitting in a circle for another 10-15 centimeters, until the mitten reaches the height of the little finger.
We begin to round the toe. To do this, we make decreases in each row, knitting together 2 outer loops from 2 and 3 knitting needles and from 4 and 1 knitting needles until there are 6 loops left on the knitting needles. We tighten them with a loop. This is how we knitted the right mitten. We knit the left one in the same way, only we remove the loops for the thumb from the second knitting needle, first knitting 2 loops, then we remove 7 loops on the pin, cast on new ones and knit the remaining 1 loop.
Now we knit the thumb. We transfer the removed loops to the knitting needle and cast on another 14 loops in a circle. We distribute all the loops onto 3 or 4 knitting needles, as convenient. We knit in a circle with facial loops of 5 centimeters until the height of the finger reaches the desired length. Next, we knit all the loops by 2, then in the next row again all the remaining loops by 2 and tighten the remaining loops.

The mittens are ready. We hide the ends of the threads and enjoy the result. In order to knit mittens with a braid pattern or a jacquard or openwork pattern, you can use this knitting principle and rely on the pattern diagram, knitting it on the front side of the mitten (on 3 and 4 knitting needles). Photos, diagrams and descriptions of knitting mittens with knitting patterns will be discussed below.

Mittens with braid pattern

To work on these mittens, take a set of 5 double needles and 250 meters of gray yarn in 100 grams. Cast on the knitting needles the required number of loops (look at the diagram) and knit with an elastic band of 2 by 2 centimeters, 10 or 12.

We make such a long elastic band in order to form a hem on the mittens. Then we move on to knitting the pattern.

Berry-colored mittens with patterned insert

To work, you will need a set of 5 double needles and berry-colored yarn, wool blend, 250 m per 100 grams.

These stylish mittens are knitted as described above, but knitted with a stripe pattern on 3 and 4 needles. The strip must be knitted according to the pattern given below.

First, cast on the loops on the knitting needles and knit 12 centimeters with a 2 by 2 elastic band. Then we move on to the stockinette stitch and knit a strip with a pattern according to the pattern.

We place the loops for the thumbs to the right and left of the strip with the pattern for the right and left hands, respectively. We close the toe according to the description given above. We knit the thumb with facial loops, as described above.

Jacquard pattern

Mittens with a jacquard pattern look very stylish and fashionable. It is knitted from threads of two or more colors. They alternate with each other according to the pattern. This type of knitting is suitable for experienced knitters.

The following are interesting and beautiful patterns with jacquard for mittens. It is important to follow the chosen pattern exactly, then the pattern will turn out beautiful and correct. Using jacquard you can knit floral patterns, ornaments, snowflakes, curls, and even pictures with animals, birds, and insects. The jacquard pattern on the mittens will be good for adults and children.

Mittens with a sewn or embroidered pattern

Mittens with an embroidered or sewn-on pattern look very beautiful and feminine. For such a pattern, knitting or floss threads, beads, beads, fur pom-poms, embroidery or crocheted elements are used.

The elastic band for mittens can be crocheted or made on a drawstring, knitting the first couple of rows with purl loops, then adding evenly several loops and knitting with stockinette stitch, then decreasing the added loops and purling a couple of rows and repeating the formation of the drawstring again.

Mittens look interesting when the cuff is knitted with threads of a different color (to match the future embroidered design on the mitten itself) and then the hem is crocheted with openwork. This fold is placed over the cuff and sewn on. Then the mitten itself is knitted and decorated with embroidery.

Finished products can be decorated with embroidered flowers, knitted tits, beads, ties with small thread or fur pompoms and beads.

End of autumn. The weather is not kind to us at all: gloomy skies, cold winds, sleet. It's time to warm up. A wonderful hobby for many women, knitting is their favorite, it will help keep their hands warm. As the old Russian proverb says: “A craftsman and a craftsman brings joy to himself and to others.” Who can deny themselves the pleasure of painstakingly knitting on long autumn evenings and then impressing their family with their creation? The main thing in this matter fresh ideas for creativity.

Beautiful patterns for mittens will not leave you indifferent. By putting the warmth of your hands and a piece of your soul into your work, please your loved ones with tender love and care.

Tips from Oktyabrina-n from the Osinki club:

I really love to knitmittens,here are some of my creations.
I knit them with very thin knitting needles, I don’t know the number, they are very old. I cast on 56 loops for the cuff, and when the main pattern begins, I add 4 more loops = 60 loops.
From the main pattern there are 53 rows up, then I begin to decrease 4 loops at a time.
The finger is 22 loops and 20-22 rows before decreasing. And I start knitting it on the 15th row from the beginning of the main pattern. This is the algorithm for all my mittens. And to change the size, I simply knit more loosely or vice versa.

Mouse stitches are knitted very simply: cast on 30 stitches on needles No. 3.5 and knit the cuff using stockinette stitch (the number of rows as you wish), for the rope you alternate 2 knits and yarn overs together, in the next row you knit the yarn overs with knit stitch and knit approximately 14-16 rows to the finger. Then close 5 loops and knit a further row, and in the next row above the closed loops, cast on new 5 loops and knit approximately another 28 rows, then begin to decrease 4 loops in every 2nd row. As you make 2 decreases, change the main thread to that , which you will make a nose for the mouse and continue to make decreases in the same rhythm, only you knit the nose not with knit rows, but with purl rows. Tighten the few remaining loops with thread.
Then you sew on a beaded nose and eyes (for the eyes you just knit a circle of single crochets and a bead on top), sew on fur ears (I take the fur from hair ties).
Crochet the finger in 1 thread - 15 single crochets for 11 rows, then make decreases gradually and at the end pull off the remaining stitches.
Knit the tie from about 115-130 loops, depending on the yarn, decorate it with beads.

The threads I have are Semenov’s “Liza”, with the addition of angora. They are not thick, so I knit in 2 threads. Sometimes I take any wool that is not very thick and add mohair of exactly the same color, it turns out very warm and soft.

I knit the fringe like this: row 1 - knit (knit everything in the round on 5 knitting needles), row 2 - knit a knit loop and pull it to the desired length (do not remove the loop from the left knitting needle), remove the elongated loop from the right knitting needle and twist the working thread from right to left .Press the long loop with your finger (it lies facing you) and knit the same loop from which the fringe was pulled.

For 64 stitches on a narrow hand you need very thin knitting needles. I knit on 60, the needles are very thin, I don’t even know the number. It turns out for the average hand.

Another problem arose - in those places where the fabric ends on one knitting needle and begins on the other, creases (stretch marks) appear. Whatever one may say, it’s almost impossible to get rid of them. I specifically pulled the thread tighter in these places so that the loop would be neater , but she still turns out ugly.

Fun, bright, like a rainbow, collection! Tell me, can I remain indifferent?